Broil King Keg Forum
June 20, 2018, 11:33:33 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Calendar Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Pitmaster 110  (Read 91 times)
Sonny
2X Keg Hero Of The Month - Throwdown Champion
Superhero Member
*****
Posts: 1017


Maple, ON


« on: June 02, 2018, 07:52:40 PM »

Hi all,

This is just my 2nd test run with the pitmaster 110.



With both vents shut the pitmaster got the keg to 205 on the lowest setting.  Then i turned the dial up to 225 and the keg was soon at 250.  Dailed it back to 215 and the fire went out. Sad

Will try again and only turn the dial up to 215 next time.
Logged

Think Big, Start Small, Fail Fast, Learn Always
bel4_20
Superhero Member
*****
Posts: 1143



« Reply #1 on: June 03, 2018, 03:56:08 PM »

Ok,i've owned the iq 120 for years now, your set up is fine lite only the middle of the pile of lump about the size of a baseball, open the top vent enough to fit the steel braided cable from the probe. Dial in the temp just below your target, once it gets there dial in your preferred temperature. once your there as long as your not opening your Keg to often it should lock it in solidly.

Hope this helps
Logged

Here's to alcohol: The source of, and answer to, all of life's problems. --Homer Simpson
Sonny
2X Keg Hero Of The Month - Throwdown Champion
Superhero Member
*****
Posts: 1017


Maple, ON


« Reply #2 on: June 03, 2018, 05:28:59 PM »

The size of a baseball is bigger than what I started with.  That could be why the fire went out.  Good to know. 
Logged

Think Big, Start Small, Fail Fast, Learn Always
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!